Sunday, May 16, 2010

Week 6 in review

My blog post is not as many as before as the basics i learnt in Infineon are much covered and usually i will share the highlights of what i had learnt if they are pretty amusing or interesting.

Week 6, i was helping another engineer, Mr. Lee to help on his project. His project was to find out the root cause of bent leads problems as complained by customers. As stated last week, root cause can be caused by several factors and i was taught how to observe and give hypothesis on the possible factors. The factors will be further tested to see whether they are really the main problem. Over the week, i was helping in taking pictures of bent leads using two different equipment. They are Smartscope and Profile Projector.

Smartscope is a special electronic microscope that are able to scan each and every legs of a package with the help of a software (i wasn't doing this as it is complicated and require many technical skills). It has other simple functions such as taking picture by magnifying the packages. By controlling the appropriate lighting, the best bent lead pictures are taken down to be submitted for Mr. Lee report.

Profile projector is yet another microscope but it was much more manual device. It has almost the same capability as normal simple microscope, but the special part of it is the ability to measure. Measurement can be taken by rotating the wheel button and only flat surface measurement is possible, which means X and Y axis only. I was asked to use this function to measure the length of the package to check whether the angle of the leads are still in the range. If the readings are very high compared to reference value, which means the specification in the angle of leads has gone wrong in the machine and vice versa.

I also learnt in this week about the difference of Trim & Form process I and II. During Trim & Form I, the tie bar between the leads are removed. Tie bar purpose is to prevent the molding compound from overflowing into the leads during molding process. While in Trim & Form II, packages are separated from lead frame, leads are bent accordingly and finally placed on the tray.
Summary:
Trim & Form I: final product in lead frame, tie bar removed
Trim & Form II: final product in individual package, leads are bent

That's all for now, looking forward to lecturer visiting day!

Saturday, May 8, 2010

Week 5 in review

For the last week, there isn't much new things that i learnt as i was repeating almost the same thing everyday, with the quantity is either many or little. i have been updating a record of flashes/mold flashes defects to be reported to my mentor. Checking cavity number, using production line software to trace out the date, machine, package type during molding and wire bond process.

On thursday, i was called by my supervisor to help another engineer which is also under his supervision to help on "bent leads" problem. Bent leads problem is usually caused by either human error, machine problem, handling method and tray. But we are most interested to find out the main cause or root cause to cure the problem. I would not be doing the analysis but more likely to help on sorting out the smaller tasks to assist the engineer.

Firstly, i was given a task to check on the matrix dimension (eg 1 x 6, 2 x 6, etc) for several packages and the dimension of the tray used to place packages after trim/form process. And then to check out the position of first leg of the packages in leadframe form when entering the trim and form machine. All these small tasks may be easy, but we should not ever overlook easy stuffs, as they might be the devil behind the problems ;)

Looking forward to learn more new things next week, and time to begin my final report :o